News

1. Clean the protective glass of the F-θ lens on a regular basis, and use a clean cloth dipped in a small amount of alcohol to wipe in one direction every day.

2. Regularly check the running status of the fan and replace the fan that is not operating normally.

3. Clean the mouse and keyboard regularly.

4. Regularly clean the laser fan and air duct dust. When the device is powered off, use an air gun to clean the air duct every week.

5. Before starting the machine every day, carefully check the pressure of the auxiliary gas. If the gas pressure is not enough, check the pipeline for leaks.

6. Check whether each button is damaged, and check whether the indicator light is normal.

7. Check the focusing lens for fouling before processing.

8. Check if there is any deviation of the lifting mechanism before processing.

9. Check the software parameter settings for changes before processing.

10. After the daily work is completed, shut down according to the shutdown procedure, and then turn off the main power.

11. After the work is completed, clean up the processing waste in time, clean the work site, and keep the work site tidy and clean.